SleepyHead 0.9.8-1 Testing Builds

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
cathyf
Posts: 515
Joined: Mon Sep 01, 2014 11:56 am

Re: SleepyHead 0.9.8-1 Testing Builds

Post by cathyf » Sat Oct 18, 2014 8:56 am

Had an odd little hiccup this morning, but don't have enough data to call it a bug yet. I inserted my sd card and launched Sleepyhead. It loaded my profile and previous data was all there, and then I went to the loader. The panel came up saying that I needed to insert the card, and the program was spinning waiting for that. I force-quit Sleepyhead and relaunched it, and it came up fine, but then when I went to load data it went into perma-spin asking for the card again. This time I went to Disk Utility and I unmounted the NO NAME partition in the sd card and mounted it. At which point Sleepyhead popped up the panel telling me that it had found the sd card and everything proceeded as normal.

Looking at my system.log file, there are a whole lot of Sleepyhead warnings about memory leaks, but nothing that looks like an error for the card read. I opened the laptop this morning after closing it at work last night, so there is lots of other cruft in the log file -- especially the disk mounter looking for those afs mounts that it isn't going to find because I'm not at work -- so I could have easily missed something significant.

If it happens again, I'll run it down more systematically. But if anybody else is looking for a little trick when Sleepyhead is having trouble finding the sd card, an unmount/mount cycle worked for me.

racprops
Posts: 522
Joined: Thu Mar 21, 2013 6:12 am

Re: SleepyHead 0.9.8-1 Testing Builds

Post by racprops » Wed Oct 22, 2014 7:48 am

New Version is GREAT..I really like how well my Pulse and O2 is inputted and lines up with the other graphs.

I also like the fine green line and how it can show a sample reading on ALL graphs.

I also like how much more information is shown. (projected knowing more can help fix things...)

NOW I need to understand all the extra data given.

And then what to do to make my sleep better.

Thanks for the upgraded version..will it ever become a done system as I noted that the last one never did.

Rich

So is this working correctly??

Image

_________________
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear
Additional Comments: I USE a Responics 960 ASV machine and a New Resmed Form lined fullface Mask plus Sheepyhead

racprops
Posts: 522
Joined: Thu Mar 21, 2013 6:12 am

Re: SleepyHead 0.9.8-1 Testing Builds

Post by racprops » Thu Oct 23, 2014 4:06 am

A couple of suggestions:

A) The box telling us to remember to put our SD Cards back should take a click to close, it goes away way too fast to barely read it.

B) As we are told to write protect the SD Card before inserting it, this warning should also include the warning to unprotect the card before returning it to our machines...

Minor things but I think it would be better use of that window...

Rich

_________________
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear
Additional Comments: I USE a Responics 960 ASV machine and a New Resmed Form lined fullface Mask plus Sheepyhead

User avatar
NateS
Posts: 1716
Joined: Wed Dec 14, 2011 8:53 pm
Location: Kaatskill Mts-Washington Irving

Re: SleepyHead 0.9.8-1 Testing Builds

Post by NateS » Thu Oct 23, 2014 7:10 am

I cannot figure out how to add a bug report.

Would appreciate a walk-through.

Thanks, Nate

_________________
Mask: DreamWear Nasal CPAP Mask with Headgear
Additional Comments: ResMed AirCurve 10 ASV; Dreamwear Nasal Mask Original; CPAPMax Pillow; ResScan & SleepyHead
Central sleep apnea AHI 62.6 pre-VPAP. Now 0 to 1.3
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: SleepyHead 0.9.8-1 Testing Builds

Post by palerider » Thu Oct 23, 2014 8:20 am

NateS wrote:I cannot figure out how to add a bug report.

Would appreciate a walk-through.

Thanks, Nate
http://sourceforge.net/p/sleepyhead/bugs/ you have to make an account there, I think it's pretty straightforward.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
Denial Dave
Posts: 1335
Joined: Wed Sep 19, 2012 6:45 am
Location: Connecticut

Re: SleepyHead 0.9.8-1 Testing Builds

Post by Denial Dave » Thu Oct 23, 2014 8:44 am

+1

it's really easy once you've registered....
palerider wrote:
NateS wrote:I cannot figure out how to add a bug report.

Would appreciate a walk-through.

Thanks, Nate
http://sourceforge.net/p/sleepyhead/bugs/ you have to make an account there, I think it's pretty straightforward.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11
if you don't know where you are going... any road will take you there.... George Harrison

User avatar
NateS
Posts: 1716
Joined: Wed Dec 14, 2011 8:53 pm
Location: Kaatskill Mts-Washington Irving

Re: SleepyHead 0.9.8-1 Testing Builds

Post by NateS » Thu Oct 23, 2014 9:23 am

palerider wrote:
NateS wrote:I cannot figure out how to add a bug report.

Would appreciate a walk-through.

Thanks, Nate
http://sourceforge.net/p/sleepyhead/bugs/ you have to make an account there, I think it's pretty straightforward.
Thanks a lot, Palerider and Denial Dave!

I forgot that I had to sign in first!

Best wishes, Nate

_________________
Mask: DreamWear Nasal CPAP Mask with Headgear
Additional Comments: ResMed AirCurve 10 ASV; Dreamwear Nasal Mask Original; CPAPMax Pillow; ResScan & SleepyHead
Central sleep apnea AHI 62.6 pre-VPAP. Now 0 to 1.3
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx

urbanscribe
Posts: 30
Joined: Sun Jun 15, 2014 4:06 pm

MAC OSX 10.10 Yosemite and Oxymetry Import Crash (0.9.8.1)

Post by urbanscribe » Thu Oct 30, 2014 10:17 am

MAC OSX 10.10 Yosemite.

Anyone else have the OXIMETER wizard crash the App as soon as it starts?
whether the oximeter is plugged in or not?
immediately after the selection of the model

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Sleepyhead Software for now

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: MAC OSX 10.10 Yosemite and Oxymetry Import Crash (0.9.8.1)

Post by palerider » Thu Oct 30, 2014 10:33 am

urbanscribe wrote:MAC OSX 10.10 Yosemite.

Anyone else have the OXIMETER wizard crash the App as soon as it starts?
whether the oximeter is plugged in or not?
immediately after the selection of the model
do you have the required usb/serial drivers installed?

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

urbanscribe
Posts: 30
Joined: Sun Jun 15, 2014 4:06 pm

Re: SleepyHead 0.9.8-1 Testing Builds

Post by urbanscribe » Thu Oct 30, 2014 10:52 am

1. thanks for the reply. this was an OS upgrade so i assumed that the drivers stayed where they were but i now realize that is a faulty assumption

2. i remember finding the drivers earlier but can't find them now
- the CLICK HERE link in SH is not working on OS X
- the link itself points to this page http://sleepyhead.sourceforge.net/wiki/ ... =Main_Page which does not have information about drivers only to mention they are needed
- not seeing them in google search for "USB to Serial UART sleepyhead" anywhere

3. would you mind sending me the link for these drivers if you have them? (using OS X)
i can reinstall quickly and see if this was a simple issue.

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Sleepyhead Software for now

User avatar
MagsterMile
Posts: 393
Joined: Mon Dec 24, 2012 1:02 pm
Location: Northern Illinois

Re: SleepyHead 0.9.8-1 Testing Builds

Post by MagsterMile » Thu Oct 30, 2014 11:05 am

Thank you Mark for your programming skills and Pugsy for your skills at leading software/downloading novices down the right path to install v9.8. I'm up and running and love the new v 9.8. All the nice new features are waiting for me to try them out. I think it's so nice to have the ResMed icon come up with the last days usage described therein. Again thanks for all your help.

_________________
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: S9 series ResMed VPAP Adapt-pressure: Epap 6.0 ps5 - 13.0

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: SleepyHead 0.9.8-1 Testing Builds

Post by palerider » Thu Oct 30, 2014 1:05 pm

urbanscribe wrote: 3. would you mind sending me the link for these drivers if you have them? (using OS X)
i can reinstall quickly and see if this was a simple issue.
it's in this post, as well as other maccy things:
viewtopic/t101034/Attention-SleepyHead- ... ml#p942850

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

urbanscribe
Posts: 30
Joined: Sun Jun 15, 2014 4:06 pm

Re: SleepyHead 0.9.8-1 Testing Builds

Post by urbanscribe » Thu Oct 30, 2014 2:05 pm

thanks !
re-installed drivers
same problem (crash)

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Sleepyhead Software for now

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: SleepyHead 0.9.8-1 Testing Builds

Post by palerider » Thu Oct 30, 2014 2:45 pm

urbanscribe wrote:thanks !
re-installed drivers
same problem (crash)
ugh... well, we'll have to wait for Mark to get to feeling better, he's been under the weather the last couple weeks and hasn't felt up to programming. I'm sure that he'll get it fixed in short order though, as soon as he gets into it (he develops SH on a mbp)

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

journey93
Posts: 6
Joined: Thu Sep 25, 2014 10:20 am

Re: SleepyHead 0.9.8-1 Testing Builds

Post by journey93 » Fri Oct 31, 2014 11:28 am

I imported data from SD card from my ResMed S9 Escape Auto. it knows the machine and model and mode, but otherwise only has the compliance data. pressure is flat a 4 AHI is flat at 0. In daily view it saya "BRICK! " - and says the machine doesn't record useful data to graph in daily view.

But my DME used the same SD card to generate a report that showed variable pressure and AHI data. It appears that the data is not being read correctly.