I hiked for 4 days/3 nights in Haleakala earlier this month. Planned on using the PowerAdd Pilot Pro and a Respironics M Series Auto CPAP for two of the three nights. I on the first night I attempted to use the combo, the CPAP was much louder than I was anticipating and ended up not using it that ni...

The led is showing 19 volts. Do I need to adjust that before charging it (it's 99% full.) No. You do have to change it before you use it to power your cpap machine. Also: whats the proper voltage for my cpap machine? 16V will do. will this battery power a Transcend 11 and at what voltage I believe ...

My cpap machine is listed below (Respironics M Series Auto CPAP with A-Flex)...will the poweradd pilot pro work with my machine or do I need an adapter? I have a lowish pressure setting of 9. What all will I need to make this work, assuming I get a good battery? I have tested my poweradd pilot pro ...

What pressure setting do you use? I might give the PowerAdd Pilot one more try at some point, since it's less $$$ and lighter than the Qi-Infinity. The first PoweAdd Pilot I got charged up ok, and charged off the USB cable just fine, but would not even turn my cpap on at all. The Qi-Infinity works ...

. Great, I recently purchased a backpacking solar panel array (14W Anker Panel), but now you have me seriously considering that 18V/28W solar panel! I'm hiking Haleakala in July for four day/three nights. I was planning on having the CPAP for only 2 nights, but with the 18V/28W panel I could probab...

Please keep me posted on what works with the solar panels. I can see them coming in handy for multiple day camping. Charging via USB (5V/1.5A) was a failure. Didn't even trickle charge. Awesome! I forgot to mention that I went camping two weeks ago. The Poweradd worked great for two nights - a 6 ho...

Tweaked my setting using a M Cpap (non-auto...with my Cpap setting at 18, I was able to sleep for ~5 hours and the poweradd went to 53% (good enough for two nights of hiking/backpacking sleep). I bought a USB to DC-M connector to see if I could possible trickle charge my poweradd with my 14W (5V/2A)...

kiapolo wrote:PowerAdd came in today. Tested it on my M Series Auto CPAP @12V and 20cm h2o (auto off).

Ran it last night for about 5 hours. When I shut it off battery was at 43%.

PowerAdd came in today. Tested it on my M Series Auto CPAP @12V and 20cm h2o (auto off). It fired up then shut down with the poweradd volt blinking. Set the poweradd to 16V and the CPAP fired up and started operating like normal! Going to test tonight. If the M Auto works, I think I'll just use that...

Would the poweradd be able to run a IntelliPAP AutoAdjust https://www.cpap.com/productpage/devilb ... chine.html?

I live in Honolulu, about 5 minutes from Ala Moana and Waikiki (read very humid) and I use a humidifier. When i've run my bipap without the humidifier my throat and nose were very dry and uncomfortable. One of my friends runs his bipap without it and he has no problems.

I just started last night using my BiPap machine... today I felt so weird! I was expecting the usual morning headaches...gone. I would lay in bed expecting to go back to sleep...nope. Came into work...do I know how 2:30 pm feels? I do now. I am staring at my computer, my mind expecting me to doze of...